Ir ao conteúdo
  • Cadastre-se

Meu computador suporta um HD de 160GB?


marcelojcsilva

Posts recomendados

aí pessoal!

É o seguinte: meu computador tem uns dois anos e suas características principais seguem abaixo, que peguei com o EVEREST. Estou pensando um comprar um HD de 160GB ATA (IDE) de 7200 RPM, mas não sei se a minha placa-mãe suporta um HD tão grande. Será q alguém poderia me responder?

Desde já agradeço, Marcelo.

Placa mãe:

Tipo de processador AMD Duron, 950 MHz (9.5 x 100)

Nome da Placa Mãe PCChips M810LR (2 PCI, 1 AGP, 1 AMR, 2 DIMM, Audio, Video, LAN)

Chipset da Placa Mãe SiS 730S

Memória do Sistema 448 MB (SDRAM)

Tipo de BIOS AMI (02/26/02)

Porta de comunicação Porta de comunicação (COM1)

Porta de comunicação Porta de impressora ECP (LPT1)

Propriedades da BIOS:

Vendedor American Megatrends Inc.

Versão 062710

Data da versão 07/15/97

Tamanho 256 KB

Dispositivos de boot Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120

Funções disponíveis Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS

Padrões suportados DMI, APM, ACPI, ESCD, PnP

Possibilidades de expansão ISA, PCI, AGP, USB

Link para o comentário
Compartilhar em outros sites

Marcelo aí vai o manual da sua placa. Desde já saiba que ela aceita sim o HD pretendido.

This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, the manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes. Trademarks IBM, VGA, and PS/2 are registered trademarks of International Business Machines. AMD and Duron are registered trademarks of Advanced Micro Devices Inc. Microsoft, MS-DOS and Windows 98/ME/NT/2000/XP are registered trademarks of Microsoft Corporation. PC-cillin is a trademark of Trend Micro Inc. AMI is a trademark of Award Software Inc. MediaRing Talk is a registered trademark of MediaRing Inc. 3Deep is a registered trademark of E-Color Inc. Other names used in this publication may be trademarks and are acknowledged. Copyright © 2003 All Rights Reserved M810L Series, V9.0M S730S/March 2003

Notice: Owing to Microsoft’s certifying schedule is various to every supplier, we might have some drivers not certified yet by Microsoft. Therefore, it might happen under Windows XP that a dialogue box (shown as below) pop out warning you this software has not passed Windows Logo testing to verify its compatibility with Windows XP. Please rest assured that our RD department has already tested and verified these drivers. Just click the “Continue Anyway” button and go ahead the installation. II

Table of Contents Chapter 1: Introduction....................................................................1 Key Features............................................................................2 Package Contents.....................................................................5 Static Electricity Precautions...................................................6 Pre-Installation Inspection.......................................................6 Chapter 2: Mainboard Installation...................................................7 Mainboard Components..........................................................8 I/O Ports...................................................................................9 Install Memory......................................................................10 Setting Jumper Switches......................................................101 Install the Mainboard.............................................................12 Connecting Optional Devices................................................13 Install Other Devices.............................................................15 Expansion Slots.....................................................................17 Chapter 3: BIOS Setup Utility.......................................................18 Introduction...........................................................................18 Running the Setup Utility......................................................19 Standard CMOS Setup Page..................................................20 Advanced Setup Page............................................................21 Power Management Setup Page............................................23 PCI / Plug and Play Setup Page.............................................25 Load Optimal Settings...........................................................26 Load Best Performance Settings............................................26 Features Setup Page...............................................................26 CPU PnP Setup Page.............................................................28 Hardware Monitor Page.........................................................29 Change Password...................................................................29 Exit........................................................................................30 Chapter 4: Software & Applications.............................................31 Introduction...........................................................................31 Installing Support Software...................................................32 Bundled Software Installation...............................................34 III

Chapter 1 Introduction This mainboard has an AMD Duron Processor. This mainboard supports front-side bus speed of 200 MHz. This mainboard uses the SiS730S chipset that integrates a 128-bit AGP Graphics Accelerator, supports integrated 256MB SDRAM onboard, one SDRAM module up to 1GB system memory, provides an optional 4X AGP slot for highly graphics display, the CPU Plug & Play through firmware, and Ultra DMA 33/66/100 function. The mainboard has a built-in AC’97 4Ch Codec, provides one AMR (Audio Modem Riser) slot to support Audio and Modem application, one CNR(Communications and Networking Riser) slot and has a built-in 10BaseT/ 100BaseTX Network Interface(optional). In addition, there is a full set of I/O Ports including PS/2 keyboard and mouse ports, one LAN port, one parallel port, one serial port, one VGA port and maximum four USB2.0 ports – two back-panel ports and onboard USB header JUSB1 providing two extra ports by connecting the Extended USB Module to the mainboard. This mainboard has all the features you need to develop a powerful multimedia workstation that is network ready. The board is Micro ATX size and has power connectors for an ATX power supply.

Key Features The key features of this mainboard include: CPU Type ♦ Supports onboard AMD Duron processor ♦ Supports 200 MHz Front-Side Bus Memory Support ♦ One DIMM socket for 168-pin SDRAM memory modules ♦ Supports integrated 256MB SDRAM onboard ♦ Maximum installed memory is 1.0GB Expansion Slots ♦ One AMR slot for a special audio/modem riser card ♦ One optional AGP4X slot for AGP 2.0-cpmpliant interface ♦ Two 32-bit PCI slots for PCI 2.2-compliant bus interface. Onboard IDE channels ♦ Primary and Secondary PCI IDE channels ♦ Support for PIO (programmable input/output) modes ♦ Support for Multiword DMA modes ♦ Support for Bus Mastering and Ultra DMA 33/66/100 modes Power Supply and Power Management ♦ ATX power supply connector ♦ ACPI and previous PMU support, suspend switch, keyboard power on/off ♦ Supports Wake on Modem, Wake on LAN and Wake on Alarm 2

Built-in Graphics System ♦ Onboard 128-bit 2D/3D 100MHz Host interface AGP Graphics Accelerator Complies with AGP V2.0 ♦ Shared memory architecture allows a maximum of 64 MB main memory to act as frame buffer ♦ Supports high resolutions up to 1920x1440 Hi-colors, up to 2048x2048 Texture size and Virtual screen up to 4096x4096 ♦ Supports hardware DVD Accelerator AC’97 Audio Codec ♦ Compliant with AC’97 2.1 specification ♦ Full-duplex Codec with independent and variable sampling rate ♦ Earphone Buffer Built-In, SNR up to 90db ♦ 4Ch DAC, support 4-channel speak-out ♦ Three Audio Jacks – Line-Out, Line-In and Microphone-In ♦ Sound Blaster, Sound Blaster Pro Compatible ♦ Digital I/O compatible with consumer mode S/PDIF ♦ Advanced power management support Onboard I/O Ports ♦ Provides PC99 Color Connectors for easy peripheral device connections ♦ Floppy disk drive connector with 1Mb/s transfer rate ♦ Two PS/2 ports for keyboard and mouse ♦ One serial port with 16550-compatible fast UART ♦ One parallel port with ECP and EPP support ♦ One VGA port ♦ Maximum four USB2.0 ports and onboard USB header JUSB1 making two extra USB2.0 ports by connecting the Extended USB Module to the mainboard ♦ One infrared port connector for optional module Hardware Monitoring ♦ Built-in hardware monitoring for CPU & System temperatures, fan speeds and mainboard voltages 3

Built-in Ethernet LAN (optional) ♦ 10Base-T/100Base-TX Physical Layer Solution ♦ Dual Speed – 100/10 Mbps ♦ MII Interface to Ethernet Controller/Configuration & Status ♦ Auto Negotiation: 10/100, Full/Half Duplex ♦ Meet All Applicable IEEE802.3, 10Base-T and 100Base-TX Standards Onboard Flash ROM ♦ Automatic CPU and board configuration ♦ Supports Plug and Play configuration of peripheral devices and expansion cards Bundled Software ♦ PC-Cillin2002 provides automatic virus protection under Windows 98/ME/NT/2000/XP ♦ MediaRing Talk provides PC to PC or PC to Phone internet phone communication ♦ 3Deep delivers the precise imagery and displays accurate color in your monitor ♦ PC DJ is a dual-MP3 player that enables users to actually mix music right on their own personal computers. ♦ Adobe Acrobat Reader V5.0 is the software to help users read .PDF files. Dimensions ♦ Micro ATX form factor (24.4cm x 24.4cm) Note: Hardware specifications and software items are subject to change without notification.

4

Package Contents Attention: This mainboard series includes two different models. They are M810L (LAN), and M810 (without LAN). Please contact your local supplier for your purchase model. Each model will support different specification, list as below: Model Specification M810L Onboard LAN PHY(U17) and LAN (RJ45) connector M810 --- Your mainboard package ships with the following items: The mainboard This User’s Guide 1 UDMA/66 IDE cable 1 Floppy disk drive cable Support software on CD-ROM disk Optional Accessories You can purchase the following optional accessories for this mainboard. Extended USB module AMR v.90 Fax/Modem card 5

Static Electricity Precautions Components on this mainboard can be damaged by static electricity. Take the following precautions when unpacking the mainboard and installing it in a system. 1. Keep the mainboard and other components in their original static-proof packaging until you are ready to install them. 2. During installation, wear a grounded wrist strap if possible. If you don’t have a wrist strap, discharge static electricity by touching the bare metal of the system chassis. 3. Handle the mainboard carefully by the edges. Avoid touching the components unless it is absolutely necessary. During installation put the mainboard on top of the static-protection packaging it came in with the component side facing up. Pre-Installation Inspection 1. Inspect the mainboard for damage to the components and connectors on the board. 2. If you suspect that the mainboard has been damaged, do not connect power to the system. Contact your mainboard vendor and report the damage.

6

Chapter 2 Mainboard Installation To install this mainboard in a system, follow the procedures in this chapter: Identify the mainboard components Install one or more system memory modules Verify that any jumpers or switches are set correctly Install the mainboard in a system chassis (case) Connect any extension brackets or cables to the mainboard connector headers Install any other devices and make the appropriate connections to the mainboard connector headers. Note: 1. Before installing this mainboard, make sure jumper JP4 set to Normal setting. See this chapter for information on locating JP4 and the setting options. 2. Never connect power to the system during installation. Doing so may damage the mainboard.

Mainboard Components The diagram below identifies major components on the mainboard. Note: Any jumpers on your mainboard that do not appear in the illustration above are for testing only. 8

I/O Ports The illustration below shows a side view of the built-in I/O ports on the mainboard. PS/2 Mouse PS/2 Keyboard Parallel Port Game/MIDI Port Serial Port COM1/3USB Ports Microphone Jack Line-Out JackLine-In Jack VGA PortLAN Port (optional) PS/2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device. PS/2 KeyboardUse the lower PS/2 port to connect a PS/2 keyboard. Parallel Port Use the Parallel port to connect printers or other parallel communications devices. COM1 Use the COM port to connect serial devices such as mice or fax/modems. COM1 is identified by the system as COM1. VGA Use the VGA port to connect VGA devices. LAN Port (optional) Connect an RJ-45 jack to the LAN port to connect your computer to the Network. USB Ports Use the USB ports to connect USB devices. Audio Ports Use the three audio ports to connect audio devices. The first jack is for stereo Line-In signal. The second jack is for stereo Line-Out signal. The third jack is for Microphone.

9

Install Memory The mainboard has one 168-pin 3.3V SDRAM Dual Inline Memory Module (DIMM) sockets for system memory modules. SDRAM provides 800 MB/s or 1 GB/s data transfer rate depending on whether the bus is 100 MHz or 133 MHz. DIMM1 Installation Procedure These modules can be installed with up to 1.0 GB system memory. Refer to the following steps to install the memory modules. 1. Push the latches on each side of the DIMM socket down. 2. Align the memory module with the socket. The DIMM sockets are keyed with notches and the DIMMs are keyed with cutouts so that they can only be installed correctly. 3. Check that the cutouts on the DIMM module edge connector match the notches in the DIMM socket. 4. Install the DIMM module into the socket and press it firmly down until it is seated correctly. The socket latches are levered upwards and latch on to the edges of the DIMM. 5. Install any remaining DIMM modules.

10

Setting Jumper Switches Jumpers are sets of pins which can be connected together with jumper caps. The jumper caps change the way the mainboard operates by changing the electronic circuits on the mainboard. If a jumper cap connects two pins, we say the pins are SHORT. If a jumper cap is removed from two pins, the pins are OPEN. 1 JP4 Jumper JP4: Clear CMOS Memory Use this jumper to clear the contents of the CMOS memory. You may need to clear the CMOS memory if the settings in the Setup Utility are incorrect and prevent your mainboard from operating. To clear the CMOS memory, disconnect all the power cables from the mainboard and then move the jumper cap into the CLEAR setting for a few seconds. Function Jumper Setting Clear CMOS Memory Short Pins 1-2 Normal Operation Short Pins 2-3

11

Install the Mainboard Install the mainboard in a system chassis (case). The board is a Micro ATX size mainboard. You can install this mainboard in an ATX case. Ensure your case has an I/O cover plate that matches the ports on this mainboard. Install the mainboard in a case. Follow the instructions provided by the case manufacturer using the hardware and internal mounting points on the chassis. ATX11 CHSFAN 1 SW1 Connect the power connector from the power supply to the ATX1 connector on the mainboard. If there is a cooling fan installed in the system chassis, connect the cable from the cooling fan to the CHSFAN fan power connector on the mainboard. Connect the case switches and indicator LEDs to the SW1 header. Here is the list of SW1 pin assignment. PinSignal PinSignal 1 HD_LED_P 2 FP PWR/SLP 3 HD_LED_N 4 FP PWR/SLP 5 RESET_SW_N 6 POWER_SW_P 7 RESET_SW_P 8 POWER_SW_N 9 RSVD_DNU 10 KEY 12

Connecting Optional Devices Refer to the following for information on connecting the mainboard’s optional devices: 1 AUDIO1 1 JUSB11IR1 JP61SPK1 1 SPK1: Speaker Connector Connect the cable from the PC speaker to the SPK1 header on the mainboard. Pin Signal PinSignal 1 SPKR 2 NC 3 GND 4 +5V AUDIO1: Front Panel Audio Header This header allows the user to install auxiliary front-oriented microphone and line-out ports for easier access. Pin Signal PinSignal 1 AUD_MIC 2 AUD_GND 3 AUD_MIC_BIAS 4 AUD_VCC 5 AUD_FPOUT_R 6 AUD_RET_R 7 HP_ON 8 KEY 9 AUD_FPOUT_L 10 AUD_RET_L JUSB1: Front panel USB Connector The mainboard has USB ports installed on the rear edge I/O port array. Additionally, some computer cases have USB ports at the front of the case. If you have this kind of case, use auxiliary USB connector JUSB1 to connect the front-mounted ports to the mainboard.

13

Pin Signal PinSignal 1 VERG_FP_USBPWR02 VERG_FP_USBPWR0 3 USB_FP_P0- 4 USB_FP_P1- 5 USB_FP_P0+ 6 USB_FP_P1+ 7 GROUND 8 GROUND 9 KEY 10 USB_FP_OC0 1. Locate the JUSB1 header on the mainboard. 2. Plug the bracket cable onto the JUSB1 header. 3. Remove a slot cover from one of the expansion slots on the system chassis. Install an extension bracket in the opening. Secure the extension bracket to the chassis with a screw. IR1: Infrared Port The infrared port allows the wireless exchange of information between your computer and similarly equipped devices such as printers, laptops, Personal Digital Assistants (PDAs), and other computers. Pin SignalPinSignal 1 NC 2 KEY 3 +5V 4 GND 5 IRTX 6 IRRX 1. Locate the infrared port IR1 header on the mainboard. 2. If you are adding an infrared port, connect the ribbon cable from the port to the SIR1 header and then secure the port to an appropriate place in your system chassis. JP6: Onboard LAN LED Indicator This connector is attached to LAN device that needs a LED indicator. Device Pins Link LED 1, +2 ACT LED +3, 4 Note: A plus sign (+) indicates the pin must be connected to the positive voltage. 14

Install Other Devices Install and connect any other devices in the system following the steps below. FLOPPY IDE2IDE111 1Floppy Disk Drive The mainboard ships with a floppy disk drive cable that can support one or two drives. Drives can be 3.5” or 5.25” wide, with capacities of 360K, 720K, 1.2MB, 1.44MB, or 2.88MB. Install your drives and connect power from the system power supply. Use the cable provided to connect the drives to the floppy disk drive header FLOPPY. IDE Devices IDE devices include hard disk drives, high-density diskette drives, and CD-ROM or DVD-ROM drives, among others. The mainboard ships with an IDE cable that can support one or two IDE devices. If you connect two devices to a single cable, you must configure one of the drives as Master and one of the drives as Slave. The documentation of the IDE device will tell you how to configure the device as a Master or Slave device. The Master device connects to the end of the cable. Install the device(s) and connect power from the system power supply. Use the cable provided to connect the device(s) to the Primary IDE channel connector IDE1 on the mainboard. If you want to install more IDE devices, you can purchase a second IDE cable and connect one or two devices to the Secondary IDE channel connector IDE2 on the mainboard. If you have two devices on the cable, one must be Master and one must be Slave.

15

Internal Sound Connections If you have installed a CD-ROM drive or DVD-ROM drive, you can connect the drive audio cable to the onboard sound system. 1 CD2 1 CD1 When you first start up your system, the BIOS should automatically detect your CD-ROM/DVD drive. If it doesn’t, enter the Setup Utility and configure the CD-ROM/DVD drive that you have installed. On the mainboard, locate the two 4-pin connectors CD1 and CD2. CD1 CD2 Pin Signal PinSignal 1 CD IN L 1 GND 2 GND 2 CD IN R 3 GND 3 GND 4 CD IN R 4 CD IN L 16

Expansion Slots This mainboard has one AGP, one AMR and two 32-bit PCI expansion slots. PCI1 PCI2AMR1AGP1 Follow the steps below to install an AGP/AMR/PCI expansion card. 1. Locate the AGP, AMR or PCI slots on the mainboard. 2. Remove the blanking plate of the slot from the system chassis. 3. Install the edge connector of the expansion card into the slot. Ensure the edge connector is correctly seated in the slot. 4. Secure the metal bracket of the card to the system chassis with a screw. 17

Chapter 3 BIOS Setup Utility Introduction The BIOS Setup Utility records settings and information about your computer, such as date and time, the type of installed hardware and various configuration settings. Your computer applies the information to initialize all the components when booting up and basic functions of coordination between system components. If the Setup Utility configuration is incorrect, it may cause the system to malfunction. It can even stop your computer booting properly. If it happens, you can use the clear CMOS jumper to clear the CMOS memory which has stored the configuration information, or you can hold down the Page Up key while rebooting your computer. Holding down the Page Up key also clears the setup information. You can run the setup utility and manually change the configuration. You might need to do this to configure some hardware installed in or connected to the mainboard, such as the CPU, system memory, disk drives, etc.

Running the Setup Utility Each time you start your computer, a message appears on the screen before the operating system loading that prompts you to “Hit <DEL> if you want to run SETUP”. Whenever you see this message, press the Delete key, and the Main menu page of the Setup Utility appears on your monitor. AMIBIOS SIMPLE SETUP UTILITY – VERSION 1.21.06 © 2000 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced Setup Power Management Setup PCI / Plug and Play Setup Load Optimal Settings Load Best Performance Settings Features Setup CPU PnP Setup Hardware Monitor Change Password Exit Esc : Quit ↑ ↓ ← →: Select Item (Shift)F2 : Change Color F5 : Old Values F6 : Optimal values F7 : Best performance values F10 : Save&Exit Standards COMOS setup for changing time, date, hard disk type, etc. You can use the cursor arrow keys to highlight any of the options on the main menu page. Press Enter to select the highlighted option. To leave the setup utility, press the Escape key. To cycle through the Setup Utility’s optional color schemes hold down the Shift key and press F2. Some of the options on the main menu page lead to tables of items with installed values. In these pages, use the cursor arrow keys to highlight the items, and then use the PgUp and PgDn keys to cycle through the alternate values for each of the items. Other options on the main menu page lead to dialog boxes that require you to answer Yes or No by hitting the Y or N keys. If you have already made changes to the setup utility, press F10 to save those changes and exit the utility. Press F5 to reset the changes to the original values. Press F6 to install the setup utility with a set of default values. Press F7 to install the setup utility with a set of high-performance values.

19

Standard CMOS Setup Page Use this page to set basic information such as the date, the time, the IDE devices, and the diskette drives. If you press the F3 key, the system will automatically detect and configure the hard disks on the IDE channels. AMIBIOS SETUP – STANDARD CMOS SETUP © 2000 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yy) : Thu Mar 27, 2003 Time (hh/mm/ss) : 10:31:45 LBA Blk PIO 32Bit Type Size Cyln Head WPcom Sec Mode Mode Mode Mode Pri Master : Auto On Pri Slave : Auto On Sec Master : Auto On Sec Slave : Auto On Floppy Drive A : 1.44 MB 3 1/2 Floppy Drive B : Not Installed Month : Jan – Dec ESC : Exit Day : 01 – 31 ↑↓ : Select Item Year : 1901 – 2099 PU/PD/+/- : Modify (Shift)F2 : Color F3 : Detect All HDD Date & Time Use these items to set the system date and time Pri Master Pri Slave Sec Master Sec Slave Use these items to configure devices connected to the Primary and Secondary IDE channels. To configure an IDE hard disk drive, choose Auto. If the Auto setting fails to find a hard disk drive, set it to User, and then fill in the hard disk characteristics (Size, Cyls, etc.) manually. If you have a CD-ROM drive, select the setting CDROM. If you have an ATAPI device with removable media (e.g. a ZIP drive or an LS-120) select Floptical. Floppy Drive A Floppy Drive B Use these items to set the size and capacity of the floppy diskette drive(s) installed in the system. 20

Advanced Setup Page Use this page to set more advanced information about your system. Take some care with this page. Making changes can affect the operation of your computer. AMIBIOS SETUP – ADVANCED SETUP © 2000 American Megatrends, Inc. All Rights Reserved Quick Boot Enabled 1st Boot Device IDE-0 2nd Boot Device Floppy 3rd Boot Device CDROM Try Other Boot Devices Yes S.M.A.R.T. for Hard Disks Disabled BootUp Num-Lock On Floppy Drive Swap Disabled Floppy Drive Seek Disabled Password Check Setup Boot To OS/2 > 64MB No L1 Cache Enabled L2 Cache Enabled System BIOS Cacheable Enabled Auto Detect DIMM/PCI Clk Enabled CLK GEN Spread Spectrum Disabled ESC : Quit ↑↓←→ : Select Item F1 : Help PU/PD/+/- : Modify F5 : Old Values (Shift)F2 : Color F6 : Load Optimal values F7 : Load Best performance values Quick Boot If you enable this item, the system starts up more quickly be elimination some of the power on test routines. 1st Boot Device 2nd Boot Device 3rd Boot Device Use these items to determine the device order the computer uses to look for an operating system to load at start-up time. Try Other Boot Device If you enable this item, the system will also search for other boot devices if it fails to find an operating system from the first two locations. S.M.A.R.T. for Hard Disks Enable this item if any IDE hard disks support the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) feature. BootUp Num-Lock This item determines if the Num Lock key is active or inactive at system start-up time.

21

Floppy Drive Swap If you have two diskette drives installed and you enable this item, drive A becomes drive B and drive B becomes drive A. Floppy Drive Seek If you enable this item, your system will check all floppy disk drives at start up. Disable this item unless you are using an old 360KB drive. Password Check If you have entered a password for the system, use this item to determine, if the password is required to enter the Setup Utility (Setup) or required both at start-up and to enter the Setup Utility (Always). Boot to OS/2 > 64MB Enable this item if you are booting the OS/2 operating system and you have more than 64MB of system memory installed. L1/L2 Cache Leave these items enabled since all the processors that can be installed on this board have internal L1/L2 cache memory. System BIOS Cacheable If you enable this item, a segment of the system BIOS will be cached to main memory for faster execution. Auto Detect DIMM/PCI Clk When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots. CLK GEN Spread Spectrum Use this item to set the system bus spread spectrum for the installed processor. 22

Power Management Setup Page This page sets some of the parameters for system power management operation. AMIBIOS SETUP – POWER MANAGEMENT SETUP © 2000 American Megatrends, Inc. All Rights Reserved Power Management ACPI Standby Time Out Disabled Suspend Time Out Disabled Display Time Out Disabled Hard Disk Time Out Disabled Ring On Power On Disabled Keyboard Power On Disabled RTC Alarm Power On Disabled RTC Alarm Date Every Day RTC Alarm Hour 12 RTC Alarm Minute 30 RTC Alarm Second 00 Power On by LAN Disabled ESC : Quit ↑↓←→ : Select Item F1 : Help PU/PD/+/- : Modify F5 : Old Values (Shift)F2 : Color F6 : Load Optimal values F7 : Load Best performance values Power Management Use this item to enable or disable a power management scheme. If you enable power management, you can use the items below to set the power management operation. Both APM and ACPI are supported. Standby Time Out This sets the timeout for Standby mode in minutes. If the time selected passes without any system activity, the computer will enter power-saving Standby mode. Suspend Time Out This sets the timeout for Suspend mode in minutes. If the time selected passes without any system activity, the computer will enter power-saving Suspend mode. Display Time Out This sets the timeout for display device in minutes. If the time selected passes without any display activity, the display will enter power-saving mode.

23

Hard Disk Time Out This sets the timeout for hard disk in minutes. If the time selected passes without any hard disk activity, the disk will enter power-saving mode. Ring On Power On The system can be turned off with a software command. If you enable this item, the system can automatically resume if there is an incoming call on the Fax/Modem. You must use an ATX power supply in order to use this feature. KeyBoard Power On If you enable this item, you can turn the system on and off by pressing hot keys on the keyboard. You must enable the Keyboard Power On jumper in order to use this feature. RTC Alarm Power On / Date / Hour / Minute / Second The system can be turned off with a software command. If you enable this item, the system can automatically resume at a fixed time based on the system’s RTC (realtime clock). Use the items below this one to set the date and time of the wake-up alarm. You must use an ATX power supply in order to use this feature. Power On by LAN The system can be turned off with a software command. If you enable this item, the system can automatically resume on LAN. You must use an ATX power supply in order to use this feature.

24

PCI / Plug and Play Setup Page This page sets some of the parameters for devices installed on the PCI bus and devices that use the system plug and play capability. AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP © 2000 American Megatrends, Inc. All Rights Reserved Plug and Play Aware O/S Yes Share Memory Size 16 MB O/S Control Normal Primary Graphics Adapter PCI Allocate IRQ to PCI VGA Yes PCI IDE BusMaster Disabled ESC : Quit ↑↓←→ : Select Item F1 : Help PU/PD/+/- : Modify F5 : Old Values (Shift)F2 : Color F6 : Load Optimal values F7 : Load Best performance values Plug and Play Aware O/S Enable this item if you are using an O/S that supports Plug and Play such as Windows 95 or 98. Share Memory Size This item lets you allocate a portion of the main memory for use by the onboard VGA display. O/S Control This item lets you select Japanese operating system or not. Primary Graphics Adapter This item indicates if the primary graphics adapter uses the PCI or the AGP bus. The default PCI setting still lets the onboard display work and allows the use of a second display card installed in a PCI slot. Allocate IRQ to PCI VGA If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You set this value to No to free up an IRQ. PCI IDE BusMaster This item enables or disables the DMA under DOS mode. We recommend you to leave this item at the default value.

25

Load Optimal Settings If you select this item and press Enter a dialog box appears. If you press Y, and then Enter, the Setup Utility loads a set of fail-safe default values. These default values are not very demanding and they should allow your system to function with most kinds of hardware and memory chips. Load Best Performance Settings If you select this item and press Enter a dialog box appears. If you press Y, and then Enter, the Setup Utility loads a set of fail-safe default values. These default values are not very demanding and they should allow your system to function with most kinds of hardware and memory chips. Note: It is highly recommended that users enter this option to load optimal values for accessing the best performance. Features Setup Page This page sets some of the parameters for peripheral devices connected to the system. AMIBIOS SETUP – PERIPHERAL SETUP © 2000 American Megatrends, Inc. All Rights Reserved OnBoard FDC Enabled OnBoard Serial Port 3F8h/COM1 OnBoard IR Port Disabled OnBoard Parallel Port 378h Parallel Port Mode SPP Parallel Port IRQ 7 Parallel Port DMA N/A OnBoard Game Port 201h OnBoard MIDI Port 300h MIDI Port IRQ 10 OnBoard PCI IDE Both OnBoard AC’97 Sound Enabled OnBoard AC’97 Modem Auto Onboard LAN Enabled USB Function Support Enabled USB Function for DOS Disabled ESC : Quit ↑↓←→ : Select Item F1 : Help PU/PD/+/- : Modify F5 : Old Values (Shift)F2 : Color F6 : Load Optimal values F7 : Load Best performance values

26

OnBoard FDC Use this item to enable or disable the onboard floppy disk drive interface. OnBoard Serial Port Use this item to enable or disable the onboard COM1 serial port, and to assign a port address. OnBoard Ir Port Use this item to define the protocol for an infrared port if you have installed an optional IR port. The choices are IrDA and ASKIR. Onboard Parallel Port Use this item to enable or disable the onboard LPT1 parallel port, and to assign a port address. The Auto setting will detect and available address. Parallel Port Mode Use this item to set the parallel port mode. You can select SPP (Standard Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or ECP + EPP. Parallel Port IRQ Use this item to assign either IRQ 5 or 7 to the parallel port. Parallel Port DMA Use this item to assign a DMA channel to the parallel port. The options are 0, 1 and 3. OnBoard Game Port Use this item to enable or disable the onboard game port, and to assign a port address. OnBoard MIDI Port Use this item to enable or disable the onboard MIDI port, and to assign a port address. MIDI Port IRQ Use this item to assign an IRQ to the MIDI port. Onboard PCI IDE Use this item to enable or disable either or both of the onboard Primary and Secondary IDE channels. AC’97 Sound This item enables or disables the onboard AC’97 audio chip. AC’97 Modem This item enables or disables the onboard AC’97 modem chip.

27

Onboard LAN This item enables or disables the onboard LAN chip. USB Function Support Enable this item if you plan to use the USB ports on this mainboard. USB Function for DOS Enable this item if you plan to use the USB ports on this mainboard in a DOS environment. CPU PnP Setup Page This page lets you manually configure the mainboard for the CPU. The system will automatically detect the kind of CPU that you have installed and make the appropriate adjustments to the items on this page. AMIBIOS SETUP – CPU PnP SETUP ©2000 American Megatrends, Inc. All Rights Reserved CPU Type Duron CPU Core Voltage 1.616 V ESC : Quit ↑↓←→ : Select Item F1 : Help PU/PD/+/- : Modify F5 : Old Values (Shift)F2 : Color F6 : Load Optimal values F7 : Load Best performance values CPU Type/ Core Voltage These items show the brand, type and core voltage of CPU that has installed in your system. Note: If you manually set the wrong speed and the system won’t run properly, press the Page Up key while the system is booting and a default setting will replace the incorrect CPU setting. 28

Hardware Monitor Page This page sets some of the parameters for the hardware monitoring function of this mainboard. AMIBIOS SETUP – HARDWARE MONITOR © 2000 American Megatrends, Inc. All Rights Reserved --- Hardware Monitor --- CPU Temperature 38°C/100°F System Temperature 31°C/87°F CPU Fan Speed 1308 RPM System Fan Speed 0 RPM Vcore 1.616 V Vcc2.5V 2.496 V Vcc3.3V 3.392 V Vcc5.0V 4.945 V +12V 12.096 V –12V -11.885 V SB3V 3.472 V SB5V 5.026 V Voltage Battery 3.472 V ESC : Quit ↑↓←→ : Select Item F1 : Help PU/PD/+/- : Modify F5 : Old Values (Shift)F2 : Color F6 : Load Optimal values F7 : Load Best performance values CPU / System Temperature These items display CPU and system temperature measurement. FANs & Voltage Measurements These items indicate cooling fan speeds in RPM and the various system voltage measurements. Change Password If you highlight this item and press Enter, a dialog box appears which lets you enter a Supervisor password. You can enter no more than six letters or numbers. Press Enter after you have typed in the password. A second dialog box asks you to retype the password for confirmation. Press Enter after you have retyped it correctly. The password is then required to access the Setup Utility or for that and at start-up, depending on the setting of the Password Check item in Advanced Setup.

29

Change or Remove the Password Highlight this item, press Enter and type in the current password. At the next dialog box, type in the new password, or just press Enter to disable password protection. Exit Highlight this item and press Enter to save the changes that you have made in the Setup Utility configuration and exit the program. When the Save and Exit dialog box appears, press Y to save and exit, or press N to exit without saving. 30

Chapter 4 Software & Applications Introduction This chapter describes the contents of the support CD-ROM that comes with the mainboard package. The support CD-ROM contains all useful software, necessary drivers and utility programs to properly run our products. More program information is available in a README file, located in the same directory as the software. To run the support CD, simply insert the CD into your CD-ROM drive. An Auto Setup screen automatically pops out, and then you can go on the auto-installing or manual installation depending on your operating system. If your operating system is Windows 98/ME/2000/XP, it will automatically install all the drivers and utilities for your mainboard; if Windows NT or manual installation, please follow the instructions described as the Installing under Windows NT or Manual Installation section.

Installing Support Software 1.Insert the support CD-ROM disc in the CD-ROM drive. 2.When you insert the CD-ROM disc in the system CD-ROM drive, the CD automatically displays an Auto Setup screen. 3.The screen displays three buttons of Setup, Browse CD and Exit on the right side, and three others Setup, Application and ReadMe at the bottom. Please see the following illustration. The Setup button runs the software auto-installing program as explained in next section. The Browse CD button is a standard Windows command that you can check the contents of the disc with the Windows 98 file browsing interface. The Exit button closes the Auto Setup window. To run the program again, reinsert the CD-ROM disc in the drive; or click the CD-ROM driver from the Windows Explorer, and click the Setup icon. The Application button brings up a software menu. It shows the bundled software that this mainboard supports. The ReadMe brings you to the Install Path where you can find out path names of software driver. 32

Auto-Installing under Windows 98/ME/2000/XP If you are under Windows 98/ME/2000/XP, please click the Setup button to run the software auto-installing program while the Auto Setup screen pops out after inserting the support CD-ROM: 1. The installation program loads and displays the following screen. Click the Next button. 2. Select the items that you want to setup by clicking on it (the default options are recommended). Click the Next button to proceed. 3. The support software will automatically install. Once any of the installation procedures start, software is automatically installed in sequence. You need to follow the onscreen instructions, confirm commands and allow the computer to restart as few times as needed to complete installing whatever software you selected. When the process is finished, all the support software will be installed and start working.

33

Installing under Windows NT or Manual Installation If you are under Windows NT, the auto-installing program doesn’t work out; or you have to do the manual installation, please follow this procedure while the Auto Setup screen pops out after inserting the support CD-ROM: 1. Click the ReadMe to bring up a screen, and then click the Install Path at the bottom of the screen. 2. Find out your mainboard model name and click on it to obtain its correct driver directory. 3. Install each software in accordance with the corresponding driver path. Bundled Software Installation All bundled software available on the CD-ROM is for users’ convenience. You can install bundled software as follows: 1. Click the Application button while the Auto Setup screen pops out after inserting the support CD-ROM. 2. A software menu appears. Click the software you want to install. 3. Follow onscreen instructions to install the software program step by step until finished. 34 :palmas:

Espero ter ajudado.

Link para o comentário
Compartilhar em outros sites

Arquivado

Este tópico foi arquivado e está fechado para novas respostas.

Sobre o Clube do Hardware

No ar desde 1996, o Clube do Hardware é uma das maiores, mais antigas e mais respeitadas comunidades sobre tecnologia do Brasil. Leia mais

Direitos autorais

Não permitimos a cópia ou reprodução do conteúdo do nosso site, fórum, newsletters e redes sociais, mesmo citando-se a fonte. Leia mais

×
×
  • Criar novo...